Time Display (Analogue Only) - Toshiba REGZA XF355 Serie Bedienungsanleitung

General controls, stereo/bilingual
transmissions, time display, sound controls
Selecting programme positions
To select a programme position use the numbered buttons
on the remote control.
Programme positions can also be selected using P
u
P .
To revert to the previous programme position press
To display on-screen information i.e. programme position,
input mode or stereo/mono signal, press
to cancel.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a few
seconds. If the broadcast is not in stereo the word Mono will
appear.
Stereo... Press s to select Stereo or Mono.
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press s to select Dual 1, Dual 2 or Mono.
The Time Display – analogue only
The time display facility allows the current (text service) time
to be seen on the television screen.
Press D whilst watching a normal television broadcast
to see a time display from the broadcaster. It will remain on
screen for about 5 seconds.
Sound controls
Volume
2 2
Press — or + to adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
The sound controls are accessible in digital and analogue
a
U
and
.
b
c
. Press again
d
19
Bass, Treble and Balance
modes, as are most of the televisions features.
In digital mode, press MENU and using
highlight TV setup then press OK.
C c
Use or to select SOUND.
In analogue mode, press MENU and
select SOUND.
SOUND
Dual
Bass
Treble
Balance
WOW
Stable sound
Back Watch TV
MENU EXIT
b
Press to highlight Bass, Treble or Balance and
C c
or to change the setting.
b
C c
or to
1/2
Dual 1
0
0
0
OK
Off