Connecting External Equipment; The Television - Toshiba 20V300P Inbetriebnahmeanweisungen

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
decoder*
media recorder
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a media
recorder it is essential that the aerial cable is connected
through the decoder and/or through the media
recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the
television. Connect the decoder TV socket to the
television. Connect the media recorder SAT socket to
the decoder MEDIA REC. socket.
Before running Auto tuning put your decoder and
media recorder to Standby.
There is a fixed external audio output which enables
the connection to a suitable Hi-Fi unit.
FIXING STRAP
SCART 1 (EXT1)
MEDIA REC.
TV
IN/OUT SAT
7 7
SCART 2 (EXT2)
A wide variety of external equipment can be
connected to the back of the television, therefore
the relevant owners manuals for all additional
equipment must be referred to.
We recommend SCART 1 for a decoder and SCART 2
for a media recorder.
If connecting S-VIDEO equipment, set the INPUT for
EXT2. See page 19.
If the television automatically switches over to monitor
external equipment, return to normal television by
pressing the desired programme position button. To
recall external equipment, press
B 1, B 2, B 3 or PC.
The cable holder can be used for aerial, media
recorder and audio cables. Do not use the cable
holder as a handle and make sure all cables are
removed before moving the television.
CABLE HOLDER
B to select between