System Settings - ZAMEL VP-819B Betriebsanleitung

SYSTEM SETTINGS

With the display on standby, touch
Item System functions Options
1 LANGUAGE Default setting: PL (Polish) (optional: EN for English).
2 RING TIME Default setting: 30 s (10 to 60 s, adjustable in 5 s steps).
3 RING VOLUME Default setting: 0.7, adjustable in a 01-10 range. (00) mutes the sound.
4 DO NOT DISTURB The mode is disabled by default during a call from an entrance panel,
MODE display-to-display intercom (internal) calls and the public address mode.
The LED will flash if this mode is enabled.
5 MONITORING The mode is disabled by default. The monitoring of remote display
microphones can be enabled in the System Settings.
///
6 MONITOR UNLOCK
Touch
to open the gate linked to the entrance panel.
7 DEVICE ADDRESS Room 1/2/3/4
8 RING TYPE Door 1 Ring Type
Door 2 Ring Type
Intercom
Ring Type
9 RING REPEAT ENABLE
DISABLE
10 PORT STATE None / CCTV1 / CCTV1&2
11 RESTORE DEFAULT Restores the display unit settings to default values.
and open the System Settings menu.
Note
to unlock the electric catch linked to the entrance panel. Touch
Choose ROOM 1 on the display that should be the
main (master) display of the system. The setting
will be yellow if the same device address is set in
two displays in the video entry phone system.
Formats the embedded flash memory of this
display.
Formats the embedded flash memory of this
display.
Formats the embedded flash memory of this
display.
The ringtone will sound repeatedly.
The ringtone will sound once.