ZAMEL VP-819B Betriebsanleitung Seite 46

All other displays in the system will display PUBLIC ADDRESS. You can now speak and be
received by other displays in the system. Touch
INTERNAL CALLS (DISPLAY-TO-DISPLAY INTERCOM MODE)
The intercom mode allows two-way voice calls between two specific displays in the video
entry phone system. Touch on the display on standby to call another display in the
system. If you have more than 2 displays in the video entry phone system, choose the display
you wish to call with or . Next, touch
at the display being called can touch
DISPLAY SOUND VOLUME / BRIGHTNESS / COLOUR / CONTRAST / IMAGE TYPE
CONTROL
Touch or in the monitoring, incoming call, voice call, intercom, or public address
mode to open the sound volume menu. Next, touch
Colour / Contrast / Image Type menu. Operate the controls with
DO NOT DISTURB MODE
You can enable or disable the DO NOT DISTURB mode in the display System Settings
menu. Touch and hold to enable or disable this mode.
DISPLAY MICROPHONE MONITORING
With the display on standby, touch and hold
another display in the voice entry phone system. If you have more than 2 displays in the
video entry phone system, choose the display you wish to listen to by touching
and confirm with .
Note:
a) The user of the display that is listening will hear everything that the microphone of the
display being listened to captures. The display being listened to will not output the
sounds captured by the microphone of the display which is listening.
b) If you have more than 2 displays in the video entry phone system, verify that the remote
listening mode is enabled in the display to which you want to listen. Go to System
Settings and verify that Can Be Monitored is set to Enable.
to exit the public address mode.
to confirm and make the call. The user
to answer the call or to reject the call.
to open the Volume / Brightness /
or .
to start listening through the microphone of
or