WIRING SPECIFICATIONS
The system supports two electric catch release configurations: with the open command sent
by (i) an entrance panel or (ii) a system display (the display open command output wire must
have the shield connected to earth).
If the open command is sent by an entrance panel, use this wiring specification:
If the entrance panel is < 30 m away from the video entry phone display, use YTDYw 4x0.5
•
2
mm
wiring.
Tekst
MONITOR
CZERWONY
NIEBIESKI
ZÓŁTY
BIAŁY
ZIELONY
BRĄZOWY
ELEKTROZACZEP
PANEL ZEWNĘTRZNY
If the entrance panel is > 30 m away from the video entry phone display, use YTDYw 4x0.5
•
2
mm
wiring.
If the open command is sent by a display, use this wiring specification:
If the entrance panel is < 30 m away from the video entry phone display, use YTDYw 6x0.5
•
2
mm
wiring.
Tekst
CZERWONY
NIEBIESKI
ŻÓŁTY
BIAŁY
BRĄZOWY
ZIELONY
CZARNY
ZIELONY
PANEL ZEWNĘTRZNY
ELEKTROZACZEP
If the entrance panel is < 30 m away from the video entry phone display, use YTDYw 6x0.8
•
2
mm
wiring.
Tłumaczenie
DISPLAY
RED
BLUE
YELLOW
WHITE
GREEN
BROWN
ELECTRIC CATCH
ENTRANCE PANEL
Tłumaczenie
RED
BLUE
YELLOW
WHITE
BROWN
GREEN
BLACK
GREEN
ENTRANCE PANEL
ELECTRIC CATCH