Technical Data; Assembly/Installation - ABNOX XFP-Slim-Serie Originalbetriebsanleitung

Technical Data

Container
Model
Pressure ratio
Delivery volume at pump output (cm
Connection (medium) external thread
Figure C/no. 9
Connection (compressed air) internal thread
Figure C/no. 8
Pump model
Container height max. (mm)
Inner container diameter min./max (mm)
Output pressure (medium) at 6 bar working pressure (bar)
Output pressure (medium) at 10 bar working pressure (bar) 250
Min./max. input working pressure (bar)
Max. air consumption (l/min)
Conveying volume per double stroke (cm

Assembly/Installation

The product is to be set up or installed at the inten-
ded use site under due consideration of the following
conditions:
• At the location and site all applicable provisions of
law must be clarified and compliance with them
assured.
• The ground and space relations are to be clarified
prior to set-up/installation of the product in order
to assure safe operation for the personnel and the
product long-term. The product must be set-up/
installed so that safe, permanent operation is
assured.
• The product may only be set up and commissioned
by specially trained technicians.
• The product is constructed for rooms that are
protected from the influence of the weather
(industry standard).
• The operation and storage in aggressive or humid
environments or outdoors can lead to corrosion
damages.
/min)
3
)
3
25 kg
AXFP2-S25-Slim
25:1
1,500
G ¼"
G ¼"
Type S
430
175-410
150
4/10
180
31
en
25 kg
AXFP2-S60-Slim
60:1
700
G ¼"
G ¼"
Type S
430
175-410
360
600
4/10
180
13
23