Installing The App - Hama Add-On Bedienungsanleitung

4.4 Fitting the central control unit
Warning
• Only operate the product from a socket that has been approved for the device. The socket must be installed
close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the
power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices
does not exceed the power strip's maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power.
• Connect the enclosed micro-USB cable to the micro-USB socket and the USB power supply unit.
• Connect the power supply unit to a properly installed and easily accessible mains socket.
• The LEDs start to flash.

4.5 Installing the app

• Download the "Hama Smart Solution" app using the QR code and install it.
https://de.hama.com/
smarthome#smart-solution
Flashing