Hama Add-On Bedienungsanleitung Seite 7

Giacomini
• To fit the Giacomini adapter, please first attach the top piece, then place the tappet extension on the valve
pin, and then finally secure the piston to the thermostat.
4.3 Fitting on the radiator valve
Warning - fitting
• Never apply force during the fitting process. This can damage your device.
• Ensure that the radiator is switched off and has cooled down before starting to fit any attachments.
1
2
• Place the thermostat straight on the valve and tighten the union nut.
• Fit the thermostat so that the LED indicator remains visible for you.
• Press the control dial (1). The "LA" display starts to flash. The radiator thermostat now carries out an
adaptation run.
• Once the adaptation run has been carried out, the display shows the current temperature. If it does not, carry
out the above steps again.
Flashing
30 sec.