Samsung DVD-P171 Bedienungsanleitung Seite 106

Rear Panel
1
1. AUDIO OUT JACKS
- Connect to the Audio input jacks of your television or
audio/video receiver.
2. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
3. DIGITAL AUDIO OUT JACKS
- Use either coaxial digital cable to connect to a com-
patible Dolby Digital receiver.
- Use either coaxial digital cable to connect to an A/V
Amplifier that contains a Dolby Digital, MPEG2 or
DTS decoder.
4. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
video.
- If P-SCAN Video Output is selected in Setup Menu,
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- See pages 26 to get more information on how to use the setup menu.
3
4
2
, P and Y
R B
5
progressive scan mode will work.
- If I-SCAN Video Output is selected in Setup Menu,
interlaced scan mode will work.
on your television.
5. SCART JACK
- Connect to a TV scart input jack.
7