Reversing The Door (Optional) - Samsung RB33J8 Serie Benutzerhandbuch

Reversing the door (optional)

Before you reverse the refrigerator door,
make sure to unplug the refrigerator.
Samsung recommends that reversing of
the door opening is only completed by
Samsung approved Service providers. This
will be on a chargeable basis and at the
customers expense.
Any damage caused while attempting
to reverse the door opening is
not covered under the appliance
manufactures warranty.
Any repairs requested due to this
circumstance will be completed on
a chargeable basis at the customers
expense.
Required Tools (Not provided & Additional part)
The refrigerator offers 3 types of screws for different uses. Be careful to note that the
screws are replaced.
Phillips Head
Driver (+)
8 mm Socket
Wrench
(for bolts)
CAUTION
During reversing door, require careful handling about small parts (screw, cap and etc.) for
infants.
40 English
DA68-03174R-06.indb 40
Not provided
Flat Head Driver (-)
Not provided
5 mm Allen wrench
(for Middle Hinge)
1. Before attempting to reverse the
refrigerator doors ensure that the
refrigerator is disconnected from the
main electricity supply and all food
stuffs are emptied from inside the
appliance.
2. If the customer does not feel confident
to follow instruction in the user manual,
a Samsung qualified service engineer
must be contacted to carry out this
change.
3. Do not plug in Refrigerator just after
door reverse finished process and wait
for at least one hour.
11 mm Wrench
(for hinge shaft)
Additional part
Hinge Cover Cap Space Door
2015. 5. 14. 9:13