Levelling The Refrigerator - Samsung RB33J8 Serie Benutzerhandbuch

Setting up your Refrigerator
Spacer
Flooring

Levelling the refrigerator

< Case 1 >
20 English
DA68-03174R-06.indb 20
Spacer
<Back>
For proper installation, this refrigerator
must be placed on a level surface of hard
material that has the same height as the
rest of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator. To protect the floor finish, cut
a large section of the cardboard carton and
place it under the refrigerator where you
are working.
If the front of the appliance is slightly
higher than the rear, the door can be
opened and closed more easily.
When installing the refrigerator, make
sure both legs contact the floor for secure
installation.
Case 1) The appliance tilts down to the left.
Turn the left adjusting leg in the direction
of the arrow until the appliance is level.
< Case 2 >
Case 2) The appliance tilts down to the
right. Turn the right adjusting leg in the
direction of the arrow until the appliance
is level.
Remove paper on spacer and then
attach a spacer (Gray block) on the
back side of refrigerator for better
performance. Make sure a spacer fix
like above image when you install
the refrigerator. It is improving the
refrigerator performance.
If You set the refrigerator in furniture,
the spacer should be removed for the
door-flushing with furniture.
• Pulling or pushing the refrigerator
may damage the floor.
Moving the refrigerator after
installation may damage the floor.
2015. 5. 14. 9:12