Connecting The Speakers And Input Wires - Pioneer PRS-A900 Bedienungsanleitung

Connecting the Unit

Connecting the Speakers and Input Wires

The speaker output mode can be four-channel, three-channel (stereo +
mono) or two-channel (stereo, mono). Connect the speaker leads to suit the
mode according to the figures shown below.
Four-channel mode
RCA input jack A
From car stereo (RCA output)
If only one input plug is used,
such as when the car stereo
has only one output (RCA
output), connect the plug to
RCA input jack A, but do not
connect a plug to RCA input
jack B.
Three-channel mode
RCA input jack A
From car stereo (RCA output)
If only one input plug is used,
such as when the car stereo has
only one output (RCA output),
connect the plug to RCA input
jack A, but do not connect a
plug to RCA input jack B.
9
RCA input jack B
Input Select Switch
For two-channel input, slide this switch to the left.
For four-channel input, slide this switch to the right.
Connecting wires with RCA plugs
(sold separately)
RCA input jack B
Input Select Switch
For two-channel input, slide this switch to the left.
For four-channel input, slide this switch to the right.
Connecting wires with RCA plugs
(sold separately)
(Right)
Speaker out A
(Left)
(Left)
Speaker out B
(Right)
(Right)
Speaker out A
(Left)
Speaker out B
(Mono)