Connecting The Speakers And Input Wires - Pioneer prs x 340 Bedienungsanleitung

Connecting the Unit

Connecting the Speakers and Input wires

The speaker output mode can be four-channel, three-channel (stereo +
mono) or two-channel (stereo, mono). Connect the speaker leads to suit the
mode according to the figures shown below.
Four-channel mode
RCA input jack B
RCA input jack A
From car stereo (RCA output)
If only one input plug is used, such as when the
car stereo has only one output (RCA output),
connect the plug to RCA input jack A, but do
not connect a plug to RCA input jack B.
Three-channel mode
RCA input jack B
RCA input jack A
From car stereo (RCA output)
If only one input plug is used, such as when the
car stereo has only one output (RCA output),
connect the plug to RCA input jack A, but do
not connect a plug to RCA input jack B.
9
RCA Input Select Switch
For two-channel input, slide this switch to
the left. For four-channel input, slide this
switch to the right.
Connecting wires
with RCA plugs (sold
separately)
RCA Input Select Switch
For two-channel input, slide this switch to
the left. For four-channel input, slide this
switch to the right.
Connecting wires
with RCA plugs (sold
separately)
(Right)
Speaker out A
(Left)
+
+ ≠ ≠
(Left)
Speaker out B
(Right)
(Right)
Speaker out A
(Left)
+
+ ≠ ≠
Speaker out B
(Mono)