Manual Defrost - Gastrodomus SALADETTE Bedienungsanleitung

Function
Temperature setting and control (EVCO)
The front panel of the thermostat
1. Compressor operation light
2. Defrosting light
3. Energy saving light
4. Stand-by light
5. Programming key (service agent only)
6. Machine On/Stand -by (keep pushed)
7. Manual defrost (keep pushed)
How to turn the machine in ON / STAND -BY status
Press and hold the
l
vice-versa.
During the button hold the
l
How to unlock the keyboard (»Loc» message)
Push any button for more than 2s, «UnL» message will appear and the keyboard will be
l
unlocked.
Note:for safety reasons the keyboard locks automatically after 30s of keys inactiv ity.
To execute any operation, please unlock the keyboard first.
How to see and modify the set point
Push and immediately release the
l
To change the set value push
l
To memorize the new set point value push the
l
Automatic defrost
The appliance will automatically run defrost cycles.
l
Note: the cycle starts from the time the appliance is initially powered up.

Manual Defrost:

Press and hold the DEFROST
l
The defrost cycle will start immediately and the Defrost
l
Note: Starting a manual defrost also resets the automatic defrost timer. The next automatic
defrost will start according to the set parameter after the manual defrost has finished.
GB
key for 4s, the machine will turn from ON to STAND -BY status and
LED will blink to show status changing.
key, the set point will be showed and starts blinking;
or arrows within 20s.
button for 3s;
key again or wait 20s .
LED illuminates.
9 P2M006STD - Ver.1.4