Gastrodomus SALADETTE Bedienungsanleitung Seite 8

Function
Temperature setting and control (DIXELL)
The front panel of the thermostat display:
·
How to see the set point
• Push and immediately release the SET key, the set point will be showed;
• Push and immediately release the SET key or wait about 15s to return to normal visualisation.
How to change the set point
• Push the SET key for more than 2 seconds to change the set point value;
• The value of the set point will be displayed and the "°C" starts blinking;
• To change the set value push the „
• To memorise the new set point value push the SET key again or wait 15s.
Automatic defrost
The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual Defrost:
• Press and hold the DEFROST
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
defrost will start according to the set parameter after the manual defrost has finished.
P2M006STD - Ver.1.4
" (up) or " " (down) arrows within 15s.
button for 5 seconds.
8
1.Defrost indicator
2.Compressor operation 3.indicator
Digital thermostat
4.Programming key (Service agent only)
5.Temperature modification keys
6.Manual defrost
The next automatic
GB