Klarstein VARICOOK SINGLE Handbuch Seite 27

Error codes
E0 Internal circuit error
E1 Without cookware or Incompatible
cookware used
E2 Internal overheat
E3 Over-voltage
E4 Under-Voltage
E5 Top plate sensor open/short circuit
E6 IGBT sensor open circuit/short circuit
E7 Top plate overheat
If the above remedies/controls can not fix the problem, unplug the appliance
immediately, contact service Centre for inspection and repairing, note the error code
and report it to Service Centre Ltd. To avoid any danger and damage to the appliance,
do not disassemble or repair it by yourself.
When showing error signal E1, E2
and E7, please check whether the
cookware is not suitable, or switch on
the appliance again after it is cooled
down naturally. When showing E0,
E3-E6, please contact service Centre
for checking and repairing.
EN
27