1. INTRODUCTION
The crepe machine is mainly used in the hotel, drinks shop and barbecue.
This product has the advantage of a high design appearance, innovative structure, small volume, light
weight, convenient operation, quick and uniform heating. In addition, its material is made of stainless
steel and the bottom of the product has a heating compartment.
Before opening it, please read this instruction book carefully to use it properly.
Warm:
This product must be grounded for safety before use.
Do not use the spray hose to clean it.
2.DATA SHEET
CODE
VOLTAGE(V)
CREP30
CREP60
CRPM
3. INDICATIONS OF USE
The ambient temperature should not exceed 50℃.
4. INSTALLATION AND OPERATION
a) At the time of installation and repair, permission for use must be obtained from the electrician.
b) The supply voltage of this equipment must conform to the supply voltage of the nameplate.
c) Do not place explosives near the product in case of fire.
d) After connecting the power supply, adjust the temperature to the desired point. When the temperature
reaches the adjusted temperature, the heat pipe stops heating. When the temperature drops a little, the
temperature controller automatically connects to the power supply and the heat pipe continues to heat. In
this way the heat can be controlled within a set temperature range.
FREQUENCY
(Hz)
220-240
50-60
220-240
50-60
220-240
50-60
EXTERNAL DIMENSIONS OF
POWER (kW)
PACKAGING(mm)
3
6
2.2
490*450*180
860*490*235
450*450*180