Maintenance; Warranty - Herth+Buss ELPARTS 95950005 Bedienhinweis

Operating Instruction
Intentional interruption of
charging cycle
EN
If you want to interrupt the battery charging
cycle, simply press the START/STOP key; the
corresponding LED will switch off to show
that the work cycle has ended. Disconnect
the output lead of the appliance from the
mains socket and the output leads from the
battery terminals.
Interruption of charging cycle in
case of a power supply cut
In the case of a 110V – 230V mains power
supply cut, the battery charger saves the
work cycle it was performing in order to
restore it automatically (only in the FLASH
mode) as soon as the 230V power supply is
restored. This feature is fundamental if the
battery charger is used to charge batteries
without the operator supervising the cyc-
le; for example, during very long charging
cycles. Whereas, in the CHARGE mode, the
START/STOP key must be pressed to resume
the work cycle.
www.herthundbuss.com
95950005
End of charging
1. Once the battery is charged, press the
START/STOP key of the battery charger.
The LED will turn off to show that the
battery charger has completed the
work cycle.
2. Disconnect the power supply lead of the
appliance from the mains socket.
3. Disconnect the output lead with the
black clamp from the motor vehicle's
earthing point or from the negative
terminal (-) of the battery.
4. Disconnect the output lead with the red
clamp from the positive terminal (+) of
the battery.
After use, replace the battery charger in a
dry place free from humidity. To clean the
outer casing, use a dry cloth.

Maintenance

Maintenance and repair jobs must be car-
ried out by trained personnel.
Operating Instruction
Disposal
The crossed-out wheelie bin symbol on the
equipment or packaging means that the
product should be collected separately from
other types of urban waste at the end of its
useful life. Any user who is going to dispose
of this tool can:
deliver it to an appropriate collection
facility for electronic or electrotechnical
equipment;
return it to the dealer upon purchase of a
new, equivalent item of equipment;
in case of a product for professional use
only, contact the manufacturer which
will arrange for the product to be proper-
ly disposed of.
Proper disposal of this product allows the
raw materials contained in it to be reused
and prevents damage to the environment
or human health. Illegal disposal of this pro-
duct is a violation of the provision concer-
ning the disposal of hazardous waste and
will give away to the application
of such fines as provided for under
current regulations.

Warranty

This tool is manufactured and tested in ac-
cordance with current EU regulations. It is
covered by a 12-month warranty for pro-
fessional use or a 24-month warranty for
nonprofessional use. We will repair any
breakdowns caused by material or manufac-
turing detects by fixing the detective pieces
or replacing them at our discretion. Should
assistance be required once or several times
during the warranty period, the expiry date
24 25
95950005
of this warranty will remain unchanged.
This warranty will not cover defects due
to wear, misuse or breakdowns caused by
blows and/or falls. In addition, this warran-
ty will no longer be valid if any changes are
made, or if the tool is damaged or sent to the
customer service in pieces.
This warranty explicitly excludes any dama-
ge to people and/or things, whether direct or
consequential.
EU Deklaration of conformity
We hereby declare, assuming full respon-
sibility, that the described product com-
plies with all the relevant provisions of
the following Directives:
Electromagnetic Compatibility Directi-
ve (EMC) 2014/30/EU;
Low Voltage Directive (LVD) 2014/35/EU;
Directive concerning the restriction of
the use of certain hazardous substan-
ces in electric and electronic equip-
ment (RoHS) 2011/65/EU.
EN