Herzberg HG-5200 Bedienungsanleitung Seite 7

3. When using your brush cutter never take your eyes off. If you need to place the throttle into the idling
position.
4. When using your brush cutter do not let the unit get closer to your feet nor raise the unit above your waist.
NOTES ON TRANSPORTATION
1. Make sure the appropriate blade cover is in place.
2. When transporting by car fix the unit firmly using a rope. do not transport by bicycle or motorcycle because
it is dangerous.
3. Never transport the brush cutter over rough roads over long distances without first removing all fuel from the
fuel tank, as doing so might cause fuel to teak from the tank.
OPERATION SAFETY PRECAUTIONS
1. Grip the handles of the brush cutter firmly with both hands. If you suspend the work, place the throttle into
the idling position.
2. Always be sure to maintain a steady even posture while working.
3. Maintain the speed of the engine at the level required to perform cutting work and never raise the speed
of the engine above the level necessary.
4. If the grass gets caught in the blade during operation or if you need to check the unit or refuel the tank
always be sure to burn off the engine.
5. If the blade touches a hard object like a stone immediately stop the engine and
check if something is wrong with the blade. If so replace the blade by new one.
6. If someone calls out while working always be sure to turn off the engine before turning
around.
7. Never touch the spark plug or plug cord while the engine is in operation. doing so may
result in being subjected to an electrical shock.
8. Never touch the muffler spark plug or other metallic parts of the engine while the
engine is in operation or immediately after shutting down the engine. Doing so
may result in serious burns.
9. When you finish cutting in one location and wish to continue work in another
spot turn off the engine and turn the unit as the blade faces away from your
body.
MAINTENANCE SAFETY PRECAUTION
1. Perform the maintenance and checking operations described in this manual at regular intervals. If any parts
must be replaced or any maintenance or repair work not described in this manual must be performed
please contact a representative from the store nearest authorized servicing dealer for assistance.
2. Under no circumstances should you ever take apart the brush cutter or alter it in any way. Doing so might
result in the brush cutter becoming damaged during operation or the brush cutter becoming unable to
operate properly.