Herzberg HG-5200 Bedienungsanleitung Seite 5

I. Always be sure to include this manual when selling, lending or otherwise transferring the ownership of this
product
2. Never allow children or anyone unable to fully understand the directions given in this manual
to use this brush cutter.
c. Never use the product when wearing pants with loose cuffs, when wearing
sandals, or when barefoot.
WORKING CONSIDERING HANDLING OF FUEL
a. The engine of this product is designed to run
b. Smoking while operating the product or refilling its fuel tank is
c. When refilling the tank always turn off the engine first and take a careful
d. If any fuel spillage occurs during refueling, use a dry rag to wipe up
e. after refueling, screw the fuel cap back tightly onto the fuel tank and
THINGS TO CHECK BEFORE USING YOUR BRUSHCUTTER
a. Before beginning work, look around carefully to get a feel for the shape of the land. or grass to be trimmed
and whether or not there are any obstacle. which might get in the way white working, and remove any
WORKING GEAR AND CLOTHING
a. When using the product, you should wear proper clothing and
protective equipments as follows.
(1) Helmet
(2) Protection goggles or face Protector
(3) Thick work gloves
(4) Non-slip-sole work boots
(5) Ear protectors
b. And you should carry with you.
1.Attached tools and files.
2.Properly reserved fuel
3.Spare blade
4.Things to notify your working area (Tope, warning signs)
5.Whistle (for collaboration or emergency)
6.Hatchet or saw (for removal of obstacles).
on a mixed fuel which contains highly flammable
gasoline. Never store cans of fuel or refill
the fuel tank in any place where there is a boiler
stove, wood fire, electrical sparks, welding sparks,
or any other source of heat or fire which might ignite the fuel.
extremely dangerous. Always be sure to keep lit cigarettes away from
the product at all times.
look around to make sure that there are no sparks or open flames
anywhere nearby before refueling.
spills before turning the engine back on again.
then carry the product to a spot 3 m or more away from where it was
refueled before turning on the engine.