Fuel; Operation - Herzberg HG-5200 Bedienungsanleitung

(1) Gear Case
(2) Bolt
(3) Nylon cutter
(4) Nylon cord

6.FUEL

WARNING
☆
☆
☆
☆
IMPORTANT
Never use oil for 4-cycle engine use or water cooled 2-cycle engine. It can cause spark plug fouling
☆
exhaust port blocking or piston ring sticking.
☆
Mixed fuels which have been left unused for a period of one month or more may clog the carburetor or
result in the engine failing to operate properly. Put remained fuel into an airtight container and keep it in
the dark and cool room.

7.OPERATION

STARTING THE ENGINE
WARNING
☆
Before starting the engine inspect the entire unit for loose fittings or fuel leaks and the
cutting attachment is properly installed and securely fastened.
Gasoline is very flammable. Avoid smoking or bringing any flame or
sparks near fuel.
Wipe up all spills before starting the engine.
Make sure to stop the engine and allow it cool before refueling the unit.
Keep open flames away from the area where fuel is handled or stored.
Mix a regular grade gasoline (leaded or unleaded alcohol-free) and a
quality-proven motor oil for air-cooled 2 cycle engines.
RECOMMENDED MIXING RATIO
GASOLINE 25 :OIL 1
☆
Place the unit on a flat firm place. Keep the cutting
head clear of everything around it.
1. Turn the cap to the fuel tank to make sure that it is fixed on
tightly (F8)
(1) Cap
(2) Fuel tank