Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Precautions; Before Using The Machine - Herzberg HG-5200 Bedienungsanleitung

Brush cutter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

For safe operation and maintenance, symbols are carved in relief on the machine.
(a)
According to these indications, please be careful not to make a mistake.
(a).The port to refuel the "MIX GASOLINE"
(b)
(b).The direction to close the choke
( c)
(C).The direction to open the choke

4. SAFETY PRECAUTIONS

BEFORE USING THE MACHINE

Position: fuel tank cap
Position: AIR CLEANER COVER
Position: AIR CLEANER COVER
a. Read this owner's manual carefully to understand
how to operate this unit properly.
b. This product has been designed for use in cutting grass, and
il should never be used for any other purpose.
c. You should never use the product when under the influence
of alcohol, when suffering from exhaustion or lack of sleep,
when suffering from drowsiness as a result of having
taken cold medicine, or at any other time when a possibility
exists that your judgment might be impaired or that you might
not be able to operate the machine properly and in a safe manner.
d. Avoid running the engine indoors. The exhaust gases contain
harmful carbon monoxide.
e. Never use the product under circumstances like those described below:
1.When the ground is slippery or when other conditions exist
which might make it not possible to maintain a steady posture
2.At night, at times of heavy fog, or at any other times when
your field of vision might be limited and it would be difficult to
gain a clear view of the area.
3.During rain storms, during lightning storms, at times of strong
or gale-force winds, or at any other times when weather
conditions might make it unsafe to use this product.
f. When using this product for the first time, before beginning
actual work, learn to handling it from skilled worker.
g. Lack of sleep, tiredness, or physical exhaustion results in lower
attention spans, and this in turn leads to accidents and injury.
Limit the amount of time of using the machine continuously
to somewhere around 10 minutes per session, and
take 10~20 minutes of rest between work sessions. Also try to
keep the total amount of work performed in a single day under 2
hours or less.
h. Be sure to keep this manual handy so that you may refer to it
later whenever any questions arise.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis