Up And Dn; Ap (Auto-Storage/Preset Memory Scan); Band; Ta Traffic Announcement - Medion md 41133 Bedienungsanleitung

Location and function of controls
4. UP AND DN BUTTONS
a) In RADIO mode, press UP or DN button shortly and repeatedly to manually tune
up or down for the desired radio station with step by step. Press UP or DN button
hold for more than 0.5 seconds to auto-matically tune up or down for the radio
station of strong signal.
b) In CD mode, press UP button to play next track. Press DN button once to play
the current track from the beginning of the current track, press DN button twice
continuously to play the last track.
Press UP or DN button hold to skip forward or backward.
5. AP AUTO-STORAGE/PRESET MEMORY SCAN BUTTON
In radio mode, press it to perform all stations memory for 5 seconds each time,
while memory digital and frequency will flash on LCD. If the button is pressed for
more than 2 seconds, it will seek station on current band, then write to the preset
memories. When the auto-storage operation is completed, it will automatically
perform for 5 seconds each time. During the memory station performing,
press 1-6 digital buttons to select and stop scanning function.
6. BAND BUTTON
Press it repeatedly to select your desired radio band during RADIO mode.
7. TA [TRAFFIC ANNOUNCEMENT] BUTTON
When press the button, it is activated as TA mode on or off.
When TA mode is on(TA is displayed on LCD), it will begin to seek TA station and
TA SEEK will be displayed on LCD for a while.
When traffic announcement is transmitted:
a) If the unit is in CD mode, it will switch to radio mode temporarily.
b) Temporarily switch over to an EON linked station when EON detects a traffic
announcement on that other program, and TP will be displayed on LCD
c) If volume level is below 20, volume level is raised to 20, and returns to its
previous mode and volume level when the traffic announcement is over.
If volume is adjusted during traffic announcement, only the previous volume
is valid.
* TA interruption function:
The current traffic announcement is canceled by pressing this key.
But the TA mode will not be off.
When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved
only when traffic program identification code has been received.
When TA is ON, traffic program identification code is not received during specified
time.
16