Operation; Before Use; Freezer Controls; Starting Your Appliance - Electrolux EUF 10800 Bedienungsanleitung

Your appliance is frost free, which means there is no need to manually defrost your appliance as this
will be carried out automatically.

Operation

Before use

Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water). Do not use soap or
detergent as the smell may linger. Dry thoroughly.
Frost Free
1 Pilot light (green)
2 Thermostat control knob
3 Fast-freezing indicator light (yellow)

Starting your appliance

Insert the plug into the wall socket. The appliance
can be activated by turning the thermostat knob (2)
beyond the Ò-16¡CÓ position. When the pilot light (1)
is illuminated this shows that the appliance is on.
The freezer is switched off by turning knob (2) to
position Ç 0 È.
When first switching on the appliance, the
fast freeze function will automatically
switch on. It will remain on for 5 hours and
automatically switch off at the end of this
time. This function can manually be
switched off at any time by pressing the
fast freeze button

Warning light (red)

If the temperature warning light (5) lights up, it
indicates that the temperature within the freezer has
reached a level where safe food storage is no longer
ensured (warmer than -12¡C).
When the freezer is first switched on, the warning
light will stay on until the temperature has dropped to
a safe level for the storage of frozen food.

Temperature control

The temperature inside the freezer is regulated by a
thermostat with 5 temperature positions and one
ÇOFFÈ ( 0 ) position.
Position 1 Ç-16¡CÈ = minimum cold
Position 6 Ç-24¡CÈ = maximum cold
Turn the thermostat control knob to the required
16
0
1 1
2
2
6
6
3 3
5
5
4
4
A B
(4).
C D E
4 Push button for fast-freezing and for stopping
the audible signal (warning light on)
5 Warning light (red)
position.
An intermediate position (-18¡C) is usually the most
suitable, although the temperature will be affected
by:
¥ Room temperature
¥ How often the door is opened
¥ How much food is stored
¥ Position of the appliance
In determining the correct temperature control setting
all these factors have to be considered and some
experimentation may be necessary.
To obtain a lower temperature, turn the thermostat
control knob to the higher numbers; to obtain a
higher temperature turn the control
numbers.
When altering the temperature setting, allow 24
hours for the temperature to
further changes.
Temperature acoustic alarm
This appliance incorporates an alarm which gives off
an audible signal whenever the warning light comes
on. This signal can be temporarily stopped by
depressing the push button for fast-freezing (1).
The fast-freezing push button can be released as
soon as the warning light is off.
Open door acoustic alarm
This appliance also incorporates an alarm which
sounds if the door is left open for more than 60
seconds. The signal will be stopped when the door is
closed again.
knob to the lower
stabilise before making