Network Environment (Software Specifications); Printer Settings (Software Specifications) - Canon imageRUNNER ADVANCE C350P Handbuch Für Starter

Network Environment
Item
Protocol Supported
Printer Settings
(Software Specifications)
Item
Resident Fonts
Printable Area
70
Specifications
(Software Specifications)
TCP/IP:
Frame type:
Ethernet II
Print applications:
LPD/Raw/IPP/IPPS/FTP/WSD/SMB/NetWare
IPX/SPX
Frame type:
Ethernet II/Ethernet 802.2/Ethernet 802.3/Ethernet SNAP/Auto Detect
Print applications:
Bindery PServer/NDS PServer/RPrinter/NPrinter
PCL:
93 Scalable fonts, 2 OCR fonts, 10 Bitmap fonts, and AndaleFont
Chinese, Traditional Chinese)
PS:
136 Scalable fonts
* The optional PCL International Font Set needs to be activated to use Andale® and WorldType® Collection, or
Andale Mono WT.
PCL5c, PCL6:
Reduced to 4.2 mm from the top, bottom, left, and right edges of the paper.
When printing in the Expand Print Region and Print mode, the upper margin becomes 4 mm, the
lower margin becomes 2.5 mm, and the side margins both become 4.2 mm. The printable area is
enlarged.
When an original has data that extends all the way to the edges, even if you select [Expand Print
Region and Print], the periphery of the data may be cut off when printing. In this case, specify the
reduction ratio in the printer driver so that data is not cut off, and perform printing again.
Specifications
Specifications
*
(Japanese, Korean, Simplified