Setting An Ip Address - Canon imageRUNNER ADVANCE C350P Handbuch Für Starter

05

Setting an IP Address

You can perform the following settings in order to
connect to and use a TCP/IP network with the machine.
Set IPv4 here.
1. Set <Use IPv4> to 'On' → set <Use IPv6> to 'Off' →
press [Next].
2. Specify each setting → press [OK].
For manual entry:
)
When the network administrator connects to a
network where each machine has a fixed IP assigned
to it, the IP address must be set manually.
If you do not know the IP, contact your administrator.
22
Configuring the Machine (Setup Guide)
To enable DHCP:
)
When connecting to a network where each machine's
IP address is automatically assigned to it by DHCP, set
<DHCP> to 'On' .
NOTE
By setting <Auto IP> to 'On' , you can have the
machine automatically search the network (LAN)
being used for usable IP addresses and assign one to
the machine. This function bypasses the DHCP server
to automatically assign IP addresses, however the
machine cannot communicate over the router when
using this function.