Contacting Your Local Authorized Canon Dealer; Setting The Limited Functions Mode From The Service Call Message Screen - Canon imageRUNNER ADVANCE C350P Handbuch Für Starter

Contacting Your Local Authorized
Canon Dealer
If a screen prompting you to contact your local
authorized Canon dealer is displayed, follow the
procedure described below.
01
Turn the main power OFF and then ON.
IMPORTANT
For precautions to take when restarting the machine,
see "Main Power and Energy Saver Key, " on p.32.
02
If the operation still cannot be
performed correctly, turn the main power
switch OFF, remove the power plug from the
outlet, and contact your local authorized
Canon dealer.
WARNING
Mishandling the power plug is dangerous. For
instructions on handling the power plug, see
"Important Safety Instructions, " on p.74.
NOTE
When you contact your local authorized Canon dealer,
have the following information available:
- Product name
- Details of the malfunction
- The error code displayed on the touch panel
display
62
Service Call Message
Setting the Limited Functions Mode
from the Service Call Message Screen
When [Limited Func. Mode] is displayed, follow the
procedures below.
IMPORTANT
If you turn OFF the main power switch when there is a
job waiting to print, that job is erased.
NOTE
If you set Limited Functions Mode to 'On' from the
Service Call Message screen, [Limited Functions Mode]
in [Management Settings] (Settings/Registration) is
also set to 'On' . (See e-Manual > Security.)
01
Press [Limited Func. Mode] → [Yes].
A message prompting you to restart the machine
(turning the main power switch OFF, and then ON)
appears.
02
Turn the main power OFF and then ON.
IMPORTANT
For precautions to take when restarting the machine,
see "Main Power and Energy Saver Key, " on p.32.