Replacing The Drum Unit - Canon imageRUNNER ADVANCE C350P Handbuch Für Starter

Replacing the Drum Unit

When the drum unit approaches the end of its service
life and needs to be replaced, a message appears on the
touch panel display. Follow the procedure described
below to replace the drum unit.
IMPORTANT
For high-quality printouts, when replacing the drum
)
unit we recommend using a Canon drum unit.
Store drum units in a location away from light
)
sources such as direct sunlight.
Storing the drum unit in a room that is cold but
)
rapidly heated, or has other rapid temperature
changes, causes water droplets (condensation) to
form inside it.
Do not remove the orange protective cover until
)
you insert the drum unit into the machine.
NOTE
Complete instructions on how to replace the drum
)
unit can be accessed by pressing [Previous] or
[Next] on the touch panel display.
Depending on your contract, a message prompting
)
you to replace the drum unit may appear on the
bottom of the touch panel display.
▼
When you finish replacing the drum unit, press
)
[Close].
01
Remove the waste toner container.
1. Open the front cover of the main unit.
2. Pull out the waste toner container.
1
2
IMPORTANT
Place the removed waste toner container on a level
surface. If the waste toner container is tilted too far,
toner may spill out.
Replacement Parts 51