Product Description - pewag RSC Montageanleitung

Mounting for use
1. Remove the wheel cover and nut caps. Remove any dirt, snow or
ice. Open the arms of the adjusted chain and place them over the
tire. Now put all arms and the chain mesh as far as possible on
the tire.
2. Move the slide switch of the ratchet to the "open" position. To do
this, move the slide switch as much as possible in the direction
"open". After that, move it slightly back in direction "drive" and
then you can move it to the end of direction "open".
3. Now pull out the adapter's rope as far as possible.
4. Place the adapter on the wheel bolt and tighten the adapter
as firmly as possible using the supplied wrench. Check if the
adapter's arrow is directed towards the centre of the rim as shown
in fig. 4a.
5. Move the slide switch of the ratchet to the "drive" position.
6. Push the hand wheel and turn it simultaneously clockwise until the
indicator display shows the arrow in full and the tips of the arrows
are facing each other.
7. Push the entire ratchet (fig. 7) towards the rim until you hear
several (4-6) clicks to decrease the distance between the ratchet
and the rim (fig. 8).
8. Set the vehicle quickly in motion, in such way that the tires do
not spin. The chain is automatically drawn onto the tire.
If a quick start is not possible and/or the chain does not automatically
pull onto the tire, drive forwards to complete approx. ½ turn of the
wheel. Now pull these parts of the chain which are not completely
mounted, onto the tire.
Check the fit of the chain after approx. 150 ft or 50 m.
Demounting
1. Stop the vehicle. Do not stand on one of the arms.
2. Move the slide switch of the ratchet to the "open" position. To do
this, move the slide switch as much as possible in the direction
"open". After that, move it slightly back in direction "drive" and
then you can move it to the end of direction "open". While doing
this, push the entire ratchet slightly towards the rim.
3. Screw off the adapter with the wrench and take it off the wheel nut.
4. Grab the arms of the chain with your hands and pull the chain
(towards you) off the tire.
5. Place the chain next to the tire and drive off the chain at walking
speed to remove it completely.

Product Description

Arms of
chain
Hand wheel
Slide switch
Chain mesh
Ratchet
9
EN