Ceado ES500 Bedienungs- Und Wartungsanleitung Seite 26

26
To disassemble these components, unhook the locking arm and remove in this order; food
pusher, juicer cover, basket, pulp retainer, and bowl (Fig. 9, Fig. 10). Reassemble in the reverse
order taking care to place the juice spout in the appropriate slot of the motor housing, place the
pulp retainer correctly, place the basket in the bowl, making sure that the basket's clutch disc
is correctly inserted on the drive disc and position the juicer cover on the bowl.
- The removable parts of the juice extractor, with the exception of the pulp container, are
dishwasher safe. The pulp container should not be immersed in hot water. Hot water can
deform the pulp container making it impossible to use.
- To obtain a higher yield of juice always control that the basket is well-cleaned by using a nylon
brush. Put the basket under running water and use the brush to clean the inside of the strainer
(see Fig. 8). Hold the basket up against the light to make sure that none of the perforations are
blocked. Should the perforations of the strainer remain blocked, immerse the basket in a
solution of hot water with 12% lemon juice or vinegar to loosen the blocked material.
Alternatively, wash the basket in a dishwasher.
- Handle the basket with care as even the slightest damage to the pulp container can cause the
juice extractor to vibrate undesirably during use.
As some products (such as peeled citrus fruits, celery and tomatoes) can easily encrust or
obstruct the perforations, you should frequently clean the basket.
THE BASKET HAS SMALL SHARP TEETH. DO NOT TOUCH THE TEETH WHEN YOU
HANDLE THE BASKET.
Do not use abrasive products or sponges to clean the basket.
Do not let traces of fruit or vegetables dry and harden on the pulp container, basket,
juicer cover or food pusher.
Never use bleach or chlorine-based cleaning products on the juice extractor.
GB
Fig. 8