Ceado ES500 Bedienungs- Und Wartungsanleitung Seite 22

22
4. Plug the appliance into a socket protected by a suitably rated circuit breaker (MCB) or fuses.
Do not use an adaptor plug.
5. Stretch the power cable out to full length. Do not let it pass over sharp edges or hot surfaces.
Do not let oil spill on it. Do not let the power cable hang loose from the counter on which the
appliance stands.
6. To use the appliance more easily, we suggest that the appliance is placed on a table or counter
top so that the juice spout and the controls face towards the right side of the user (suggested
height for counter top from a round level: 90 cm (36 inches), to be adjusted according to the
height of the user).
Installation of model ES900 (see Fig. A)
1. Drill the worktop to insert the discharge connection using the "installation TEMPLATE" provided
(see attached sheet).
2. Place the appliance without the juicer cover, the pulp container and the bowl in the final
position with the aid of the indication of the position of the feet on the installation template.
3. Place the "discharge connection" in the hole just created, taking care to insert the fixing
hooks "b" correctly into the holes "c" provided in the bottom of the appliance.
4. Insert the pulp container completely into the "discharge connection", ensuring that it is in a
perfectly straight position (see 4, Fig. A).
5. Complete the installation of the appliance by correctly positioning the bowl and the juicer cover
and closing the locking arm.
USE
Make sure the tabletop and feet are clean to ensure grip during operation.
Before first use: rinse all of the parts that will have contact with food in running water i.e.;
food pusher, juicer cover, basket, bowl, pulp container and pulp retainer. To disassemble the
various parts see Fig. 9, Fig. 10 and Fig. 11.
Suggestions (only for ES500, ES500S and ES700 models): to reduce the cleaning
procedures to a minimum we suggest placing a biodegradable plastic bag inside the pulp
container and folding the top of the bag over the edge of the pulp container (see Fig. 6). By
using this method, once you have finished using the appliance, you can put the waste directly
into a composting or waste bin.
1
Wash the fruit or vegetables you will use.
NOTE: Many types of fruit and vegetables for example apples, carrots and cucumbers fit
through the feed chute without having to be cut into pieces. When you make juice from carrots
it is a good idea to insert the larger end of the carrot first, or to cut the carrot in two or three
pieces.
For models with feed chute ø 50 mm, use the latter to juice carrots. To optimize the juice output
chop fruit into smaller pieces.
GB