Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
MINI IR 10 IR THERMOMETER
ITEM NO.: 1367583
INTENDED USE
The mini IR thermometer is intended for non-contact measurements of temperatures between
-33°C and +500°C. The device is not suitable for industrial or professional use.
Use the device in dry environments only. Only use button cells of type LR44 or equivalent type
for power supply.
Use of the product other than for its intended use described here is prohibited and may result
in damage to the product. It may also related to hazards such as short-circuit, fire, electric
shock, etc. No part of the product must be altered or modified. Read this operating instructions
completely before first use and keep it for future reference.
DELIVERY CONTENT
• Thermometer
• 2x LR44-Batteries
• Operating instructions
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in theses operating instructions, we assume no liability
for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
• For safety reasons (CE), unauthorized modifications or alterations of the device
are not permissible.
• This device is not a toy and must be kept out of reach of children.
• After abrupt temperature changes, the device must stabilize and adjust to the new
ambient temperature for about 15 minutes before it can be used again.
• Do not expose the device to high temperature for long periods of time.
• Avoid using the device near welding machines, induction heaters and other
electromagnetic fields.
If you have doubts regarding the correct use or questions that remain unanswered in the
operating instructions, contact our technical support team or any other expert.
OPERATING AND CONTROL ELEMENTS
6
1
4
3
2
1. Battery compartment lid
3. Display
2. Measurement button
4. Probe
5. ºC / ºF pinhole button
6. Batteries
OPERATION
a) Inserting / replacing batteries
Observe correct polarity when inserting batteries. Batteries should be
removed from the device if it is not used for a long period of time to avoid
damage through leaking. Contact with damaged batteries can cause acid
burns on skin. Always wear proper protective gloves when handling damaged
batteries.
Batteries must be kept out of reach of children. Do not leave (rechargeable) batteries
lying around, as there is risk, that children or pets swallow them.
Replace all batteries at the same time. Mixing old and new batteries in the device can
lead to battery leakage and device damage.
Do not dismantle batteries and avoid short circuits and contact with fire. Never
recharge non-rechargeable batteries. There is a risk of explosion!
1. Once the battery voltage is only ≤2.8 V, the full battery status symbol appears in the upper
right corner of the display. Once the battery voltage drops to ≤2.6 V, the empty battery
status symbol starts flashing; measurements can no longer be conducted. Replace the
batteries as follows.
2. Open the battery compartment lid (1) by turning it anticlockwise.
3. Replace the exhausted batteries by new batteries of the same type, thereby observing
correct polarity (positive terminal facing outwards).
4. Close the battery compartment lid (1) by turning it clockwise.
b) Operation
To measure temperatures, press and hold the measurement button (2) and point the probe (4)
at the object to be tested for one second. Make sure the measuring object is bigger than the
measuring spot. The calculated temperature is the average temperature of the measured
surface. Distance and size of measuring spot are in proportion of 1:1.
The temperature measured last will be shown on the display (3). When releasing the
measurement button (2), the display will continue to show the last measured temperature
for approx. 15 seconds. The thermometer will switch off automatically after 15 seconds of
VERSION 03/16
inactivity.
Press the °C / ºF pinhole button (5) on the back of the thermometer using a sharp object in
order to select the desired unit for display (°C/°F).
c) Troubleshooting
Display
Lo
Er1
Er2
Er3
CLEANING AND CARE
Avoid contact with moisture. If the thermometer gets in contact with moisture, dry it
immediately.
Blow loose dirt particles from the probe head. Use a fine lens brush to remove any remaining
dirt residue.
Clean the surface of the thermometer with a slightly damp cloth. Dampen the cloth with water
only. Do not use any chemicals or cleaning agents for cleaning.
DISPOSAL
5
Disposal of unusable batteries and rechargeable batteries
Return unusable batteries and rechargeable batteries to designated collection facilities of
your waste disposal company or to shops that sell batteries for free. That way you fulfill your
legal obligation and at the same time help protect the environment!
TECHNICAL DATA
Operating voltage ........................................ 2 x 1.5 V batteries, type LR44
Operating time per each charge .................. up to 40 hours without break
Accuracy ...................................................... ± 2 ºC or 2% (whatever value is higher)
Measurement range .................................... -33 to +500 ºC (-27 to +932 ºF)
Resolution: ................................................... 0.1 ºC (0.1 ºF)
Response time ............................................. approx. 1 second
Operating conditions .................................... 0 to +50 ºC, <90 % RH (non-condensing)
Storage conditions ....................................... -20 to +65 ºC, <70 % RH (non-condensing)
Dimensions (W x H x D) .............................. 13 x 13 x 126 mm
Weight ......................................................... approx. 42 g (included batteries)
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at
the time of printing.
© Copyright 2016 by Conrad Electronic SE.
The thermometer cannot measure through transparent surfaces. It will measure the
temperature of the surface instead.
To maintain the accuracy of the thermometer, it should not be used in locations
with excessive generation of water steam, dust, smoke and/or vapors. It is also not
recommended measuring reflecting surfaces such as stainless steel or aluminum
packaging.
The measured object is too cold (below -33°C) or too hot (above
Hi
or
500°C).
The thermometer was too quickly exposed to temperature changes.
Wait for the thermometer temperature to stabilize.
The thermometer temperature exceeds the operating conditions
(-33 to +50ºC).
The thermometer must be restarted. Remove the batteries and wait for
approx. 1 minute. Then reinsert the batteries.
Disposal of electric and electronic devices and components
In order to protect the environment and to fully recycle raw materials, users are
obligated to return used and defect devices to public collection facilities for the
recycling of electronic waste products.
The crossed out wheelie bin symbol indicates that this product must be disposed of
at a collection facility for electronic waste products in order to allow for the recycling
of raw materials in the best possible way.
Description
V2_0316_02-ETS-Mkde
Werbung
