Technical Data; Warranty Information - Audiotec Fischer CONDUCTOR Benutzerhandbuch

7. Technical data

Housing
Hardware
Connection
Cable length
Dimensions (Ø x H)
Installation depth
Compatibility
DSP PC Tool compatibility
Warranty information
The warranty service is based on the statutory regulations. Defects and damage caused by overload or improper han-
dling are excluded from the warranty service. Any return can only take place following prior consultation, in the original
packaging together with a detailed description of the error and a valid proof of purchase. Technical modifications and
errors excepted! We accept no liability for damage to the vehicle or device defects caused by the incorrect operation of
the device. This product has been issued a CE marking. This means that the device is certified for use in vehicles within
the European Union (EU).
Note
"The Bluetooth word mark and the logos are registered trademarks of Bluetooth SIG, Inc. and any use of these trademarks by Audiotec Fischer
®
GmbH takes place under licence. Other trademarks and trade names are the property of the respective owners."
46
25
39,2
ABS housing with brushed aluminum button
Rotary encoder, 12x RGB LEDs and 48 MHz ARM processor
MiniDIN or NanoFit / no separate power supply required
5 m – disconnectable, 4.8 m connecting cable
+ 0.2 m CONDUCTOR cable
Ø 46 x 28.7 mm
17 mm / 0.67"
The CONDUCTOR is exclusively intended for BRAX, HELIX and MATCH DSPs /
DSP amplifiers with ACO (Advanced CoProcessor). A current compatibility over-
view is available at www.audiotec-fischer.de/conductor
Version 4.75a and higher
46
Slot
* All dimensions in mm
35