Troubleshooting - Audiotec Fischer CONDUCTOR Benutzerhandbuch

6. Troubleshooting

Problem: CONDUCTOR is displaying an error code
If a problem occurs when establishing a connection, the CONDUCTOR displays various error codes.
Error code 1:
Cause: The connected device is not supported. The CONDUCTOR is only compatible with devices that are
equipped with the ACO platform.
Error code 2:
Cause: The CONDUCTOR software is not current and requires an update.
Solution: Connect your DSP / DSP amplifier to a PC and start the latest DSP PC-Tool software.
The CONDUCTOR is then updated automatically.
Error code 3:
Cause: The ACO platform of the DSP / DSP amplifier is not current and requires an update.
Solution: Connect your DSP / DSP amplifier to a PC and start the latest DSP PC-Tool software. The ACO up-
date then starts automatically.
Error code 4:
Cause: The CONDUCTOR is not enabled in the DSP / DSP amplifier.
Solution: Enable the CONDUCTOR as described on page 23 in the Chapter 2.2 "Connecting the
CONDUCTOR to a DSP / DSP amplifier".
33