Herunterladen Inhalt Inhalt Diese Seite drucken

Volume Control Configuration (Volume Menu 1 - 4); Signal Input Selection Menu - Audiotec Fischer CONDUCTOR Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. Operating the CONDUCTOR
3.1 Volume Control Configuration (Volume menu 1 - 4)
The four volume menus let you separately control up to 4 different volumes (master, digital, HEC/AUX, subwoofer vol-
ume, Rear Attenuation, etc.). These can be set as described under point 4.2 "Volume Control Configuration" on page 30.
The volume menus are restored to the most recently set values after restarting the system. If the "Startup volume" option
(see page 30, point 4.2.5) has been configured, the volume is switched back on at the maximum set limit level, if this
was exceeded when the device was switched off.
If a volume is turned down completely, the volume is muted independent of the set range.
Actions:
Turn:
Long press:
Double-press:
Triple-press:
Extra-long press (5 sec.): Start Bluetooth pairing*
LED feedback:
The set volume level is displayed by the bottom left LEDs in a clockwise direction in the color assigned for the volume.
Muting (long press) is signalled by a single rotating LED.
Changing the volume when muted cancels the muting.
Minimum volume

3.2 Signal Input selection menu

The "Signal Input selection" menu lets you switch between the signal sources connected to the DSP / DSP amplifier. The
menu starts with the currently selected or most recently active input.
Actions:
Turn:
Select signal input
Long press: Activate signal input
LED feedback:
Green:
Main input
Yellow:
Digital input (Optical & Coax Input)
Blue:
Extension Card 1 (HEC1)
Turquoise: Extension Card 2 (HEC2 – only BRAX DSP)
Main input
Note: The CONDUCTOR automatically detects the signal inputs of the connected DSP / DSP amplifier. Only the avail-
able signal inputs can be selected. All other inputs are not displayed by LED feedback and can also not be selected.
26
Set volume level
Mute / demute
Next track*
Previous track*
½ volume
Digital input
Maximum volume
HEC1
* Only for devices with optionally installed Extension Card BT
HEC2

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis