General Information - Audiotec Fischer CONDUCTOR Benutzerhandbuch

1. General information
To make optimal use of all the possibilities afforded by the product, please carefully read through the following installa-
tion instructions. We guarantee that the flawless condition of every device has been checked before delivery.
We recommend appointing a specialist to install the product, as the verification of professional installation and connec-
tion of the device is a prerequisite for the warranty services.
Install your CONDUCTOR in a dry place in the car. Do not fit the device near parts that radiate heat or near the vehicle's
electronic control units.
To protect against accidents, the CONDUCTOR must be professionally mounted so that the control unit does
not pose a danger to passengers and/or the vehicle during a critical driving situation, such as emergency brak-
ing.
Information on professional installation is provided in the "Installation instructions" chapter on the following pages.
Important: During assembly, make sure that none of your vehicle's safety systems (e.g. airbag) are negatively affected
in their function.
• Do not mount the CONDUCTOR on an airbag cover (e.g. steering wheel, A pillar or dashboard on the passenger
side)
• Do not fasten the control unit in the driver's field of vision
• Do not place the CONDUCTOR loose on the dashboard
Before cutting the slot to mount the device, make sure that no electrical cables and components, etc., are concealed
in the area behind it. Otherwise, these could be damaged. Please be aware that these kinds of parts may also be con-
cealed in double-skin panelling.
The cable connections must be routed so that no risk of clamping, crushing or breakage exists. In case of sharp edges
(sheet metal cutouts), all cables must be cushioned against chafing. In addition, the connecting cable must never be
routed together with lines / cables for vehicle appliances (fan motors, fire detection modules, fuel lines, etc.).
21