Sound Setup Selection Menu; Bluetooth Playback Control Menu - Audiotec Fischer CONDUCTOR Benutzerhandbuch

3.3 Sound Setup selection menu

The "Sound Setup selection" menu lets you switch between the DSP's up to 10 Sound Setups. The menu starts with the
currently selected or most recently active Sound Setup.
Actions:
Turn: Select Sound Setup
Long press: Activate Sound Setup
LED feedback:
Green: Sound Setup active
Yellow: Sound Setup memory space occupied, setup inactive
Red: Sound Setup memory space empty, cannot be selected
You can use the CONDUCTOR to select and enable the DSP's 10 Sound Setup memory spaces. The memory spaces
are displayed as follows:
5 6
4 7
3 8
2 9
1 10
Examples of the LED feedback in the "Sound Setup selection" menu:
Sound Setup no. 5
enabled
3.4 Bluetooth Playback Control menu*
The "Bluetooth Playback Control" menu lets you control an optionally installed Bluetooth module (play / pause, next /
previous track, enable pairing mode). The menu always starts with the play / pause function (four top LEDs lit).
Actions:
Turn:
Left turn:
Right turn:
Long press:
Extra-long press (5 sec.): Start Bluetooth pairing
Sound Setup no. 5 avail-
able – can be enabled
by holding down the
button
Perform action automatically
Counter-clockwise: Previous track
Clockwise: Next track
Play / pause
Sound Setup no. 5 not
occupied and can also
not be selected
* Only for devices with optionally installed Extension Card BT
27