Default Configuration - Audiotec Fischer CONDUCTOR Benutzerhandbuch

5. Default configuration
The following options are configured in the as-delivered condition:
• Main menu: Volume Control → The CONDUCTOR always starts with the selected Master Volume.
• Automatic switch back to main menu: Enabled → The CONDCUTOR automatically switches back to the Master Vol-
ume menu after 5 seconds of inactivity.
• Only the "Sound Setup selection" menu is enabled by default, which lets you switch between the different DSP mem-
ory spaces. The "Signal Input selection" menu as well as the "Bluetooth Playback Control" menu are disabled by
default. This means that two "Volume Control" menus (master and subwoofer volume) as well as the "Sound Setup
selection" menu are active in the as-delivered condition.
• LED brightness: 70 % → The default brightness is 70% of the maximum brightness.
• LED dimming: 50 % of LED brightness → The brightness is reduced by 50 % after 8 seconds of inactivity.
• Installation orientation: 0 ° rotation → The rotation is set to off by default, so the conductor's locking notch is in the
12 o'clock position.
• Volume 1 → This volume is configured as the "Master Volume" by default. The volume is white and has a control
range of 60 dB, which can be controlled in 1 dB steps. The "Startup Volume" is disabled by default, meaning that the
previously set volume is used whenever the system is restarted.
• Volume 2 → This volume is configured as the "Subwoofer Volume" by default. The volume is red and has a control
range of 24 dB, which can be controlled in 0.5 dB steps. The "Startup Volume" is disabled by default, since this func-
tion is not needed for the "Subwoofer Volume".
32