RP-Tools RP-8240B2 Installations- Und Wartungshandbuch Seite 12

RP-8240B2 & RP-8250B2
1.3
CAUTIONS FOR THE SAFETY OF THE OPERATOR
Operators must not be under the influence of sedatives, drugs or alcohol when operating the machine.
Before operating the lift, operators must be familiar with the position and function
of all controls, as well as with the machine features shown in the chapter "Operation
and use"
1.4
WARNINGS
Unauthorized changes and/or modifications to the machine relieve RP-TOOLS of
any liability for possible damages to objects or people. Do not remove or make
inoperative the safety devices, this would cause a violation of safety at work laws
and regulations.
Any other use which differs from that provided for by RP-TOOLS of the machine
is strictly forbidden.
The use of non-genuine parts may cause damage to people or objects
1.5
SCRAPPING
When your machine's working life is over and it can no longer be used, it must be made inoperative by
removing any connection to power sources.
These units are considered as special waste material, and should be broken down into uniform parts and
disposed of in compliance with current laws and regulations.
If the packing are polluting or non-biodegradable, deliver them to appropriate handling station.
DECLARATION OF WARRANTY AND LIMITATION OF LIABILITY
RP-TOOLS has paid proper attention to the preparation of this manual. However, nothing contained
herein modifies or alters, in any way, the terms and conditions of RP-TOOLS agreement by which
this lift was acquired, nor increase, in any way, RP-TOOLS' liability to the customer.
Every effort has been made to ensure that the information contained in this manual is correct,
complete and up-to date. RP-TOOLS is not liable for any mistakes made when drawing up this
manual and reserves the right to make any changes due the development of the product, at any time.
REV. 01
RP-TOOLS Werkstatt-Technik
TO THE READER
11 / 84