The Installer; Warning; Preliminary Operations; Installation Site - Unox ChefTop XC314 Bedienungsanleitung

ENGLISH
B. INSTRUCTION FOR THE IN-
STALLER

1. WARNING

All the operations of installation, assembly, service and
assistance must be carried out by qualified personnel ac-
cording to current laws and regulations.
Please read carefully the instruction manual before the
installation and commissioning of the appliance.
The appliance must be unaltered (check for any transport
damage).
Remove all informative material from the unit.

2. PRELIMINARY OPERATIONS

2.1 INSTALLATION SITE

Before placing the appliance, please verify the overall di-
mensions and the exact position of the electrical and wa-
ter connections and of the fumes exhaust as indicated on
the attached file "Technical Data".

2.2 REMOVAL OF THE PROTECTIVE FILM

Carefully remove all the protective film from the external
walls of the appliance.
Pay attention not to leave any residue of glue. If there
should be any residue of glue, please remove it with an
appropriate solvent.

2.3 POSITIONING

Place the appliance respecting the safety standards indi-
cated below.
Place the appliance so that its back can be easily reached
in order to make the electrical connections and to pro-
vide the necessary service.
The appliance is not suitable for built-in installation or
side by side positioning.
If the appliance is placed near walls, partitions, kitchen
cabinets, decorated edges, etc., it is recommended these
are made of non combustible material.
Otherwise, they must be coated with non combustible
thermal insulating material and the fire prevention stand-
ards must be respected.
Do not install the appliance near a fryer.
Place the hood on the top of the oven and fix it with the
screws supplied.
To fix the back part of the hood to the oven use the fixing
screws that you find on the top back part of the oven.
UNO X
R
ENGLISH
4