BALDR B0359WST2H2R Bedienungsanleitung Seite 14

•
Please do not use other electrical products such as headphones or
speakers operating on the same signal frequency
•
Neighbors using electrical devices operating on the same signal
frequency can also cause interference.
•
Place the main unit more than 1.2 meters away from the power
source for better usage. (including the power source of the product
itself or any other electrical appliances)
OPERATION GUIDELINES
MAX AND MIN RECORD
1. Press "MEM" button to check outdoor and indoor max/min tem-
perature and humidity.
2. The checking order is : Max Record→Min Record→Exit. The
value will display for 5 seconds.
3. Press and hold the "MEM" button to clear the max and min
record.
4. Normally, the Max and Min record will update every 24 hours
at 0:00.
5. If no operation for 5 seconds, it will automatically exit .
TEMPERATURE
After power on ,the indoor temperature will display automatically,
1.
it will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
2. Indoor temperature display range:-10℃~ 50.0℃(14℉~ 122℉);
for temperature lower than -10℃,the reading will be :"LL.L" ; for
temperature higher than +50℃,the reading will be : "HH.H".
3.
Outdoor temperature display range :-40℃~60℃(-40℉~140℉);
for temperature lower than -40℃,the reading will be :"LL.L" ; for
temperature higher than +60℃,the reading will be : "HH.H".
14