BALDR B0359WST2H2R Bedienungsanleitung Seite 13

2 .
Or when alarm is ringing, press the top button to activate snooze
function. The alarm will ring again in 5 minutes snooze interval.
And the "
snooze mode. Press any other button except top button to exit
the snooze mode. And the alarm will restart next day.
3 .
When alarm rings, the ascending "Bibi" alarm sound will last for 2
minutes if no operation.
PLACEMENT INSTRUCTION
BALDR sensors are sensitive to surrounding environmental condi-
tions. Proper placement of both the main unit and outdoor sensor
are critical to the accuracy and performance of this product.
Main Unit Placement
Place main unit in a dry area free of dirt and dust. To help ensure an
accurate indoor temperature measurement, be sure to place the
Main unit away from heat sources or vents.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.Sen-
sor is water resistant for water splashes and is designed for general
outdoor use, however, to extend its life place the sensor in an area
protected from direct weather elements.The best location is 4 to 8
feet(1.2 to 2.4 meters) above the ground with permanent shade and
plenty of fresh air to circulate around the sensor.
Important placement guidelines
•
The distance between main unit and transmitter should be at least
5~6.5 feet (1.5~2 meters) away from any interfering sources such
as computer monitors or TV sets
•
To maximize wireless range, place units away from large metallic
items, thick walls, metal surfaces, or other objects that may limit
wireless communication
" symbol will be flashing on screen to indicate the
13