Connecting The Units - Pioneer meh p7100r Installationsanleitung

Connecting the Units

Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
1*
3*
5*
Connect leads of the same
color to each other.
Cap (1*)
When not using this terminal,
do not remove the cap.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
ISO connector
Note:
In some vehicles, the ISO connector may
be divided into two. In this case, be sure to
connect to both connectors.
3
IP-Bus input (Blue)
2*
Multi-CD player
(sold separately)
4*
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
Orange
To lightnig switch terminal.
Black (ground)
To vehicle (metal) body.
Speaker leads
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
Subwoofer
output or Non
Fading Output
Antenna jack
IP-BUS cable
Fuse holder
Fuse resistor
Fuse resistor
: Front left +
: Front left ≠
: Front right +
: Front right ≠
: Rear left + or Not used
: Rear left ≠ or Not used
: Rear right + or Subwoofer +
: Rear right ≠ or Subwoofer ≠
Refer to a Handsfree
Telephone unit's manual
(sold separately).
This product