Pioneer meh p9100r Installationsanleitung Seite 4

Connecting the Units
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
3*
5*
Cap (1*)
When not using this terminal,
do not remove the cap.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
3
1*
2*
4*
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Multi-CD player
(sold separately)
Connect leads of the same
color to each other.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Antenna jack
IP-BUS cable
See the section "RFP Alert
Installation".
White/yellow
Fuse holder
Fuse resistor
Fuse resistor