Klarstein Alpbach Bedienungsanleitung Seite 28

EN
28
Activate/deactivate heating mode
Press the + (E) or - (F) buttons to open the heating setting (even if the weekly timer has
been activated). Proceed as follows:
1. Press the + or - buttons to display the current temperature on the screen
2. Press the + or - buttons to adjust the temperature press the ok button (c) to confirm
your setting. When the set temperature is higher than the room temperature, the unit
will start heating. The heating process will not start if the set temperature is lower
than the room temperature.
Notes
• The adjustable temperature range of the device is between 10 °C and 30 °C.
• When „OFF" is set, the unit does not heat.
• When „ON" is set, the unit heats continuously.
High heating capacity
Press the MENU button (D) once. H" is displayed on the screen and the heating symbol
flashes.
To set the temperature, first press the OK button. The factory set temperature is 10 °C
(50 °F) and is displayed on the screen as follows: