Remote Control; Select The Best Location - Ayce B0012 Gebrauchsanweisung

INSTALLATION
Installation accessories
1
3
1 Air exhaust duct
3 Baffle plate

SELECT THE BEST LOCATION

Beside a window, a door or a French window.
●
Keep the required distance from the return air outlet to the wall or other obstacles at
●
least 60cm.
Fix one end of the air hose on the air outlet on the backside of the appliance.
●
Extend the air hose to ensure that other end of the air hose has clearance between
●
the window, door or French window, or wall hole.
Air outlet or intake cannot be blocked by protective grid or any obstacle.
●
INSTALL EXHAUST HOSE AND ADAPTER
1. Extend the air exhaust duct by drawing out the two ends of the duct.
2. Screw the air exhaust duct into the connector of air exhaust duct.
3. Connect the connector of air exhaust duct to the unit.
2
POWER DEHUM.
UP MODE
4
DOWN SPEED
TIMER SLEEP
2 Window exhaust adapter
4 Remote controller

REMOTE CONTROL

HOW TO INSTALL BATTERIES
Open the battery box on the back of remote control, and install One button battery
1.
(CR2032 3V).
2. Put the batteries inside the slot, with anode and cathode in right directions.
3. Put on the back cover.
Notice:
The anode and cathode of the batteries must be corresponding to the signs of "+" and
1.
"-" on the remote controller.
For long time no use, take out the battery.
2.
To prevent environmental pollution, take out the used battery and dispose safety and
3.
appropriately.
How to Use
To operate the air conditioner , aim the
Remote controller at the signal receptor.
The remote controller at distance of up to
5m when pointing at signal receptor of the air
conditioner.
72 | 73
GB
Slide the cover to open.
Be sure the direction
is correct.