kafer ETC536 Bedienungsanleitung Seite 33

instead). Note: the receiver will show only the timer which is running
(For example: If timer 1 is paused, the receiver will not show timer 1).
Timer number
Pause the timer: To pause the timer, press the START/STOP button
(The corresponding timer will be shown on the receiver, as the receiver
will show only the running timer).
Resume the timer: To resume the timer, press the START/ STOP button
again.
Alarm in timer: The thermometer (i.e. transmitter and receiver) will
alarm, the backlight will be on (alarm and flashing for 30 seconds) and
the timer will start to count up (the down arrow in Fig.5 will change to an
up arrow instead) once the timer has completed. Note:The thermometer
will keep alarming (5 seconds) and the backlight will keep flashing (5
seconds) every minute.
Stop the alarm: To stop the alarm on transmitter and receiver, press
START/STOP button on the transmitter.
2. Receiver
2.1. ON/OFF
a) Turn on:
Turn on: Press
(or "---°F ---°F") will be shown on the screen of the receiver (Fig.6A)until
Fig.5 – An example of timer 2
button. A STEADY signal icon (
Down arrow indicating
that the timer is
counting down.
Timer value
) and "---°C —°C"
33