kafer ETC536 Bedienungsanleitung Seite 29

Note: To return to previous step, press
Browning time
Cooking time (reference)
Alarm temperature (Core)
1.4.1. Browning process:
Start: Press START/STOP button to confirm and start the browning
timer. A down arrow shown on the screen indicates that the timer is
counting down.
Transmitting signal: After the browning timer starts, the transmitter will
send the signal to the receiver, and the receiver will start to run a
browning timer (Note: The values on transmitter and receiver are
slightly different. It is due to the signal transmission rate). Note: In the
browning process, the thermometer will alarm only if the browning timer
has completed. The core temperature is not the criterion which triggers
the alarm at this stage. The thermometer will not alarm even when the
core temperature is higher than alarm temperature.
Alarm in browning process: The thermometer will alarm, the backlight
Browning Time
Cooking Time
Alarm Temp.
Fig.2 – Cooking information on RI 1
Browning Time
Cooking Time
Alarm Temp.
Fig.2A – Down arrow
button.
Time Renaining
Browning timer
Time Renaining
A down arrow shown
on the screen,
indicates that the
timer is counting
down.
29