Information On The Cables - Medion s62004 md82309 Bedienungsanleitung

Information on the cables

The information on the cables is to be used if the cables are to be laid
individually. To do so, contact a specialist workshop and hand over
the supplied ISO plug and the information from this chapter.
You do not need the following information to connect the radio to the
ISO plugs in your vehicle.
Two ISO sockets are supplied with cables:
Plugs with power cables for ISO socket block A
Plugs with speaker cables for ISO socket block B
Overview of ISO socket A: power
Memory back-up (yellow)
The yellow memory back-up cable must be connected with the permanent
plus. Otherwise the station memory function does not work (refer to
"Assignment of the ISO socket block on the car radio", page 18).
Antenna relay cable (blue)
The blue cable is available for a relay-controlled antenna. The relay extends
the antenna automatically when the radio is switched on. When it is switched
off the antenna is retracted.
This relay cable can also be used to control an external amplifier. Please refer
to the amplifier's operating instructions for the correct connections.
Never connect the blue cable to the engine cable of the relay controlled
antenna; this could damage the radio!
UK-16