Type Label; Intended Use - resideo Braukmann CBU140 Einbauanleitung

3.5 Type label

CBU 140-25A-043
230 V ~1
50 Hz
H :43 m Q
max
FO002115
1 Series
2 Frequency
3 Serial number
4 Power output
5 max. feed rate
Key for the serial number
Calendar 2009 2010 2011 2012 2013
year
1st half-year S-U
2nd half-year S-V
3.6 Version
Plug-in ready compact booster unit, consisting of:
• Self-priming multi-stage centrifugal pump
• Monitoring and control unit for the centrifugal pump
• System control
• Inlet tank with integrated drinking water inlet via
mechanical float valve and free outlet according to EN
1717
• fastening set for wall mounting, consisting of screws,
wall plugs and mounting bracket
• Flexible expansion joint connection PN10 with
DVGW-/TÜV approval and 10-year guarantee for the
pressure side as well as the drinking water connection
(length approx. 30/50 cm)
• Membrane pressure expansion vessel
• Installation manual with mounting template
3.7 Overview
In an angular tank designed for wall mounting there is a multi-
stage high-pressure pump. The high-pressure pump is
connected via bent tube to an inlet, which leads to the supply
tank.
S - B
3,7 A
800 W IP44
3
:4,1 m /h
max
1 Rated voltage
2 max. power input
3 max. pumping head
4 Protection class
S-W S-Y S-A S-C
S-X S-Z S-B S-D
GB
Fig. 1 CBU140 Structure
1 Pump control
2 Pump
3 Inlet tank
4 Drinking water
connection

3.8 Intended use

The compact booster unit may only be operated in such areas
as described in the other applicable documents.
Non-intended operation of the compact booster unit can
result in danger to persons, systems, the surroundings and
the environment.
• Operate the compact booster unit only if it is in perfect
working condition.
• Do not operate the compact booster unit if it is only
partially assembled.
• The compact booster unit may only be used to pump
the medium as described in the documentation of the
respective version.
• Never operate the compact booster unit without pump
medium.
• Observe the values for minimum pumping rates
(avoiding damage because of overheating, storage
damage, ...).
• Observe the values for maximum pumping rates (to
avoid damage due to overheating, floating ring seal
damage, cavitation damage, storage damage, ...).
• Do not throttle the input of the compact booster unit (to
avoid cavitation damage).
• Other modes of operations, if not mentioned in the
documentation, have to be coordinated with the
manufacturer.
8
5 Pressure delivery
6 Tank
7 Vent valve
MU1H-1377GE23 R0320